Menu Close

FNX-A100MA-2

FNX-100MA-2 is a high frequency mobile flat-panel digital X-ray radiography system,suitable for radiology department, orthopedics, ward, emergency room, operatingroom,ICU and other departments. With flexible movement, easy operation, high efficiency, tomeet the radiography for all of human body’s parts, such as head, limbs, chest, spine,lumbar vertebrae, abdomen, etc.

Product Usage

Product Specification

1. Generator output: 5.0 kW
2. kV range: 40 kV – 120 kV in 1kv steps
3. mA range: 25~100 mA ,180mAs
4. Exposure time: 4 films per min, less than 20 ms per film
5. X-ray tube: Stationary anode tube with a focal spot of 0.3*1.5 mm6. Collimator: Bright field light beam collimator with 120 W halogen lamp and autoshut-off facility.
7. Power requirements: Single phase 220 V +/- 10% -240 V +/- 10% Voltage tolerance;50/60 Hz power supply
8. Mobile stand: Light-weight, low height mobile and easily maneuverable stand.
9. The mobile radiographic unit also include a handheld control and a microwavewireless remote control for the 20-meter microwave remote Without the restriction ofBarriers and directional, different from the infrared remote control . Grids reduce thefog line filters and raise the degree of scattering contrast.
10. The unit is provided with a line (power) cord of acceptable durability, quality, lengthand is secured with adequate strain reliefsThe unit include, power plugs that are sufficient for the maximum voltage and currentof the unit.
11. The maximum distance from the ground: 21750mm, and minimum distance fromthe ground: <500mm. Rotating around the horizontal axis 180° , rotation around thevertical: + 90°, the collimator can rotate 180°.

1. Monoblock
* High frequency and High voltage monoblock, 27 years experiences, make sure the stability quality.* 50kHz inverter frequency, good x-ray quality, low dose, worldtop-level technology.
*Thermal capacity 500KJ, long time continuous exposing.* With digital closed loop control technology and fault alarm function
2. Exposure Controller
* Hand controller — wired exposure*Microwave controller — wireless remote, within 10 meters
3. Flat Panel Detector
* Whole-plate non-spliced, cesium iodide + amorphous silicon flat-panel detectorsderive from the world’s leading technology, which greatly improves performance.* Version Scope: 14”x 17″
* Spatial resolution: 3.3Lp/mm
* Pixel size: 140um
* Output gray scale: 16bit
4. Self Balance Function
* The support arm can stop at any positionthat’s our self balance technology, easyoperation.
5. Networked device: high quality image and output information system* The networking functions of PLX5100 include: Dicom storage, Dicom film printingDicom film transfer.
* lt has standard DICOM 3.0 interface, supporting film printing, output, storage,barrier-free docking hospital PACS system.
6. Workstaion:
Workstation model: IC12ACPU model: >i3Memory capacity: >4GBHard drive capacity: > 1 TB
7. LCD Touch screenEquip with touch screen controller,Human body graphic for parameter choice.

Description

Mobile DR FNX-A100MA-2

Mobile X-ray machine + Flat panel detector + Workstation (Portablecomputer/software)

FNX-100MA-2 is a high frequency mobile flat-panel digital X-ray radiography system,suitable for radiology department, orthopedics, ward, emergency room, operatingroom,ICU and other departments. With flexible movement, easy operation, high efficiency, tomeet the radiography for all of human body’s parts, such as head, limbs, chest, spine,lumbar vertebrae, abdomen, etc.

Product Usage

Product Specification

1. Generator output: 5.0 kW
2. kV range: 40 kV – 120 kV in 1kv steps
3. mA range: 25~100 mA ,180mAs
4. Exposure time: 4 films per min, less than 20 ms per film
5. X-ray tube: Stationary anode tube with a focal spot of 0.3*1.5 mm6. Collimator: Bright field light beam collimator with 120 W halogen lamp and autoshut-off facility.
7. Power requirements: Single phase 220 V +/- 10% -240 V +/- 10% Voltage tolerance;50/60 Hz power supply
8. Mobile stand: Light-weight, low height mobile and easily maneuverable stand.
9. The mobile radiographic unit also include a handheld control and a microwavewireless remote control for the 20-meter microwave remote Without the restriction ofBarriers and directional, different from the infrared remote control . Grids reduce thefog line filters and raise the degree of scattering contrast.
10. The unit is provided with a line (power) cord of acceptable durability, quality, lengthand is secured with adequate strain reliefsThe unit include, power plugs that are sufficient for the maximum voltage and currentof the unit.
11. The maximum distance from the ground: 21750mm, and minimum distance fromthe ground: <500mm. Rotating around the horizontal axis 180° , rotation around thevertical: + 90°, the collimator can rotate 180°.

1. Monoblock
* High frequency and High voltage monoblock, 27 years experiences, make sure the stability quality.* 50kHz inverter frequency, good x-ray quality, low dose, worldtop-level technology.
*Thermal capacity 500KJ, long time continuous exposing.* With digital closed loop control technology and fault alarm function
2. Exposure Controller
* Hand controller — wired exposure*Microwave controller — wireless remote, within 10 meters
3. Flat Panel Detector
* Whole-plate non-spliced, cesium iodide + amorphous silicon flat-panel detectorsderive from the world’s leading technology, which greatly improves performance.* Version Scope: 14”x 17″
* Spatial resolution: 3.3Lp/mm
* Pixel size: 140um
* Output gray scale: 16bit
4. Self Balance Function
* The support arm can stop at any positionthat’s our self balance technology, easyoperation.
5. Networked device: high quality image and output information system* The networking functions of PLX5100 include: Dicom storage, Dicom film printingDicom film transfer.
* lt has standard DICOM 3.0 interface, supporting film printing, output, storage,barrier-free docking hospital PACS system.
6. Workstaion:
Workstation model: IC12ACPU model: >i3Memory capacity: >4GBHard drive capacity: > 1 TB
7. LCD Touch screenEquip with touch screen controller,Human body graphic for parameter choice.

Product Advantages

High Quality Clinical lmages

Advantages of Mobile DR.(Compare with stationary DR)

ItemMobile DRStationary DR
Machine TypeMobile: Mobile machine can be used at different roomStationary; only can be use at x-ray room, cannot move
Power Supply220V+10%; we have battery inside and we can take 200 PCS films after charging.We can use in outside or other room once hospital have no electric380V+38V: Fixed machine have no battery and UPS Once hospital have no electric or power not stable.the machine will stop working
RadiationWe are 5KW mobile DR with monoblock design, we have very lower radiation, we can use at patient room with easy protection.Large more than 20KW with high radiation, doctor and patient should take more lead protection
InstallationEasy for installation, no need complex room conditions, convenient to moving between ward, x-ray room and especially used in ICU for some emergency operation, no need moving patient again for second brakeFixed machine, cannot moving, difficult for installation, cannot used at ward and ICU for some emergency operation
Batteryinside battery, machine can use with electric and we can used it at outside without electricNo electric no working without UPS, cannot working and outside or some emergency place.
Heat unit300 KHU300KHU
Flat panel detectorWe use wireless FPD, we can put FPD in any position to take radiography, we can charging for FPD and use it without electric. Easy for maintenanceFixed FPD, cannot moving out,cannot working without electric, not easy for maintenance

Reviews

There are no reviews yet.

Be the first to review “FNX-A100MA-2”

Your email address will not be published. Required fields are marked *

Get a Quotation